{"id":188,"date":"2026-03-09T21:03:39","date_gmt":"2026-03-09T21:03:39","guid":{"rendered":"https:\/\/shop.dun.cx\/?post_type=product&p=188"},"modified":"2026-03-09T21:03:53","modified_gmt":"2026-03-09T21:03:53","slug":"timer-relay-digital-display-with-trigger-xy-j02","status":"publish","type":"product","link":"https:\/\/shop.dun.cx\/index.php\/product\/timer-relay-digital-display-with-trigger-xy-j02\/","title":{"rendered":"Timer Relay Digital display with Trigger XY-J02"},"content":{"rendered":"

Product specification:<\/strong>
\n1. Working voltage: Micro USB 5.0V power-up and 6–30V supported.
\n2. Triggering signal: High level trigger signal (3.0V\u201424V) and systematically common ground improve the capability of anti-interference. (Short circuit common ground is also acceptable)
\n3. Output ability: Capable of controlling the direct current that within 30v 5A or alternating current within 220v5A.
\n4. Quiescent current: Working current is 20mA; 50mA.
\n5. Working life: Over a hundred thousand times; Working temperature: -40\u201485\u2103; Size: 6.2*3.8*1.7cm
\n6. Photocoupled isolation can intensify the ability of anti-interference. Circuit board of industrial grade.
\nSetup parameter and cut off the power will be memorized permanently. Attention: Relay output is
\npassive contact. Uncharged output. One line controls power off and on.<\/p>\n

\"xy-j02

xy-j02 interface<\/p><\/div>\n

 <\/p>\n

Timing range:<\/strong>
\n0.1 second (minimum) ~ 999 minutes (maximum) continuously adjustable
\nHow to select the timing range:<\/strong>
\nIn the mode selection interface set the parameter value by short press the \u201cSTOP\u201d button, select the timing range;
\nXXX. Decimal point at units digit; Timing range: 1 second ~ 999 second.
\nXX.X, Decimal point at tens digit. Timing range: 0.1 second~99.9second
\nX.X.X. All the decimal points are lighted up. Timing range: 1 minute ~ 999 minutes.
\nFor instance, if you want to set the OP to 3.2 seconds, you should move the decimal point to the tens digit. Digital display tube: 03.2
\nParameter: OP Ton, CL off time, LOP circuit times (1~999 times, \u201c—\u201d represents limitless circuit.) These parameters are mutually independent, but each mode shares these parameters together. For instance, the customers set the OP Ton to 5 seconds at P1.1, but they want to shift to P1.2. When the main interface shows \u201c000\u201d, short press \u201cSET\u201d button, and it will shows OP<\/p>\n

Main interface<\/strong>: It will appear \u201c000\u201d without decimal points when at \u201cOFF\u201d status, while appears decimal points clearly at \u201cON\u201d status.
\nMode selecting interface: Long press \u201cSET\u201d button to set parameter while long press \u201cSET\u201d button to return back to the main interface. It\u2019s very simple!
\nWiring diagram with shared power source, DC controle<\/p>\n

\"xy-j02

xy-j02 Shared power source<\/p><\/div>\n

Relay using mode:<\/strong>
\n1. ON: Relay is allowed to conduct within OP ton time.
\n2. OFF: Relay is banned conducting and it is always at closing status. Short pressing \u201cSTOP\u201d button in the main interface, you will realize the shift between \u201cON\u201d and \u201cOFF\u201d. It will flash and return to the main interface. (This is acute stop function. One-button turn on and off the relay. )
\nSleep mode:<\/strong>
\n1. C-P sleeping mode: When not using the relay for 5 minutes, the digital tube will turn off the display automatically, and the program will keep working.
\n2. O-d normal mode: Display of digital tube always on. Long press \u201cSTOP\u201d button for 2 seconds and release to shift the status of C-P and O-d. It will flash and return to the main interface.<\/p>\n

 <\/p>\n

XY-J02 \u0995\u09bf\u09ad\u09be\u09ac\u09c7 \u0995\u09be\u099c \u0995\u09b0\u09c7?<\/strong><\/h3>\n

\u098f\u0987 \u09ae\u09a1\u09bf\u0989\u09b2\u099f\u09bf \u098f\u0995\u09ac\u09be\u09b0 \u099f\u09cd\u09b0\u09bf\u0997\u09be\u09b0 \u0995\u09b0\u09be \u09b9\u09b2\u09c7 \u09b8\u09c7\u099f \u0995\u09b0\u09be \u09b8\u09ae\u09df \u0985\u09a8\u09c1\u09af\u09be\u09df\u09c0 \u0986\u0989\u099f\u09aa\u09c1\u099f \u0985\u09a8 \u09ac\u09be \u0985\u09ab \u09b9\u09df\u0964 \u09ae\u09a1\u09bf\u0989\u09b2\u099f\u09bf\u09a4\u09c7 \u09b8\u09be\u09a7\u09be\u09b0\u09a3\u09a4 \u0995\u09df\u09c7\u0995\u099f\u09bf \u0985\u09aa\u09be\u09b0\u09c7\u099f\u09bf\u0982 \u09ae\u09cb\u09a1 \u09a5\u09be\u0995\u09c7, \u09af\u09be \u09ac\u09bf\u09ad\u09bf\u09a8\u09cd\u09a8 \u0995\u09be\u099c\u09c7\u09b0 \u099c\u09a8\u09cd\u09af \u09ac\u09cd\u09af\u09ac\u09b9\u09be\u09b0 \u0995\u09b0\u09be \u09af\u09be\u09df\u0964<\/p>\n

\u09aa\u09cd\u09b0\u09a7\u09be\u09a8 \u09ae\u09cb\u09a1 \u09b8\u09ae\u09c2\u09b9:<\/strong><\/h4>\n
    \n
  1. \n

    P1.1 (Single Delay Mode):<\/strong><\/p>\n